Price list for Guitar Mill Luthier Shop is as follows:
BODIES:
Poplar $175.00 Pine $175.00
Alder $185.00 Swamp Ash $245.00 (Click here to learn more about Swamp Ash pricing)
Paulownia $255.00 African Mahogany $205.00
Honduran Mahogany $255.00
BODY ADD-ONS:
1 pc. Swamp Ash Body +$85*
1 pc. Alder Body +$125*
Trans Grade / Pretty Grain +$35*
Ultra-Light Body ASH (4 lbs. Or Less) +$95*
Ultra-Light Body Alder (4 lbs. 08 oz. Or Less) +$55*
*Bass bodies will weigh approx. 08 oz. more
*light-weight, 1 pc and/or trans-grade (premium) tonewoods subject to availability and possible market price increases.*
Heel Contour + $45
Body Binding +$95 (per side – unfinished body)
Body Binding +$145 (per side – finished body)
Checkerboard Binding +$395 (per side, on finished bodies)
Checkerboard Binding +$350 (per side, on unfinished bodies)
Body Contours & Extra Pick-up Routes +$25 per rout
Charlie Christian, Coodercaster or other specialty rout: $150
Lefty +$10
3-Hole 1970s Neck +$35
Floyd Rose Routing +$65
Rear Routing +$65
Install Ferrules +$45
Install Tele Jack Clip +$15
Thinline/Hollow Body Option +$100 (Flame Maple Top +$80 / AAA Flame Maple Top +$120)
Mid-Production Modification +$150 (Occurs any time a body is shipped off for modification in the midst of production)
Hand-cut/Pin Router Custom Fee +$150 (Occurs any time a body is so customized it cannot be cut using our CNC programs.)
Anodized or Tort Guard +$65
BODY FINISHING:
Solids/Trans $299.00 Burst $340.00
Metallic $309.00 Candies $379.00
Flake $420.00 Cl Satin $269.00
Cl Gloss $299.00 Neon $399.00
Hand Rubbed Danish Oil $75
BODY RE-FINISHING (FINISHING COSTS FOR ITEMS NOT MADE AT GUITAR MILL):
Stripping Fee (If Existing/ Old Finish is Nitrocellulose) : $150 (Applicable unless completely stripped and clean.)
Stripping Fee (If Existing/ Old Finish is Polyester or Urethane): $275 (Applicable unless completely stripped and clean.)
Solids/Trans $329.00 Burst $379.00
Metallic $349.00 Candies $439.00
Flake $499.00 Cl Satin $279.00
Cl Gloss $289.00 Neon $479.00
Hand Rubbed Danish Oil $85
BODY FINISHING ADD-ONS:
Custom Color Match +$150
Tape and Scrape (Bodies w/ Binding & Getting a Finish ONLY) +$50 per bound side
Stripping Fee (When we are refinishing a body that is already finished) +$150
RELIC/AGING BODIES:
Closet Clean Relic*: FREE
PRISTINE/Showroom Finish +$65
Light +$35
Medium +$45
Heavy +$90
Finish over Finish +$125
Tribute Fee: +$300 (To mimic wear)
*Closet Clean – Means basically new. The wear is meant to mimic an old guitar that has been hardly used/played, then put in a closet in its case for the last 50 years.
NECKS:
1 Pc. Maple Guitar Neck: $305
1 Pc. Maple Bass Neck: $345
Maple w/ Indian Rosewood Slab Fingerboard Guitar Neck $315 (CITES compliant, available internationally!)
Maple w/ Indian Rosewood Slab Fingerboard Bass Neck $340 (CITES compliant, available internationally!)
NECK WOOD UPGRADES:
Birds Eye Maple +$95** AAA Birdseye +$110** AAA Birdseye 1 pc Neck +$180
Flame +$50 AAA Flame +$120 AAAA+(Master Grade) + $300
¼ Sawn +$85 Mahogany +$25
Roasted Maple +$95
**Mineral Spot Disclaimer: The natural process that produces bird’s eye figuring also produces small mineral “pockets” that cause small black spots or streaks. We usually cannot see these until we start milling the wood. Finding completely clean pieces is pretty rare. We will obviously not give you a hideous piece of wood, but necks made out of bird’s eye maple may contain these mineral spots.
FINGERBOARD UPGRADES:
Birdseye +$55 Veneer Board +$85
Flame +$25 Dark Brown Ebony +$45
Jet Black Ebony +$85
Richlite® (Choose Black (Ebony Replacement) or Chocolate Glacier (Brown Ebony Replacement)) +$55
Pau Ferro (Santos Rosewood) +$12 (CITES compliant rosewood, available internationally.)
Dark Indian Rosewood + $35 (CITES compliant, available internationally.)
Madagascar Rosewood + $55 (NOT available internationally.)
Brazilian Rosewood +$275 (Contact for availability, NOT available internationally.)
NECK ADD-ONS:
Bone Nut (Unslotted) +$45
Bone Nut (Slotted) +$75
MOP Dots +$12
Abalone Dots +$12
Custom Measurement (Profile/Nut Width/etc) +$35 per measurement
Custom Back Profile +$75
22nd Fret Extension +$45
Compound Radius +$35
Conversion (25.5″ to 24.75″) +$85
Conversion (25.5″ to 28.625″ Baritone) +$85
SRV Asymmetrical Profile +$35
Block Inlay & Binding +$280
Block Inlay only +$160
Binding only +$120
Reverse Headstock +$85
EVO Gold Frets +$45
G&L Neck (22 fret, no overhang) +$100
LSR/Locking Nut Slot +$65
Stainless Steel Frets +$120 (due to cost of frets, extra labor and wear on tools)
Mid-Production Modification +$150 (Occurs any time a neck is shipped off for modification in the midst of production)
NECK FINISHING:
Satin $160* Satin + Vintage Tint $180*
Gloss $170* Gloss + Vintage Tint $195*
Hand-Rubbed Danish Oil $75
(*Add $45.00 for necks with a Maple Fingerboard for fret scraping.)
NECK RE-FINISHING (For necks that WERE NOT built at Guitar Mill):
Stripping Fee: $150 (Applicable unless completely stripped and clean.)
Satin $160* Satin + Vintage Tint $195*
Gloss $175* Gloss + Vintage Tint $210*
Hand-Rubbed Danish Oil $75
(*Add $45.00 for necks with a Maple Fingerboard for fret scraping.)
NECK FINISHING ADD-ONS:
Headstock Finish (to match body) +$120
Custom Decal Application +$55
All-Mahogany or All-Rosewood Neck Grain Fill Upcharge +$45
Tape/Scrape (necks w/ binding getting finish) +$90
RELIC/AGING NECKS:
Light +$45
Med +$65
Heavy +$95
Tuners & String Tree Wear +$45
REPAIRS AND MODS PRICE LIST:
Shop rate is $100/hour.
Repairs are handled with the following formula:
Parts Price + ($100xH)
(H = Number of Hours Spent on Repair) Most small repairs take less than two hours.
Final Assembly (includes setup): $650
+$150 for Offsets & Basses
(Parts NOT included)
Set-Up (Electric): $100
Set-Up (Acoustic): $150
Set-Up (Archtop): $250